PEEK 30% Carbon
PEEK 30% Carbon Overview
What is the Material: PEEK 30% Carbon is a semi-crystalline material filled with carbon fibers.
Key Material Features: This material is beneficial in applications requiring increased mechanical strength, low density, wear resistance, low friction, and dimensional stability, while maintaining many properties of other PEEK materials including chemical resistance and temperature resistance.
Other Considerations: The addition of carbon fibers increases the level of heat conductivity, which is beneficial in sliding applications. Also the carbon fibers increase the materials structural properties like glass filled PEEK material, but this material is not abrasive like glass filled PEEK can be. This material has notable hydrolysis/steam resistance.
Physical
| Property | Value | Typical ASTM Test |
|---|---|---|
| Chemical Designation | (PEEK) Polyetheretherketone | |
| Trade Names (®, ™) | Sustapeek, Tecapeek, Ketron, Unitrex | |
| Filler | 30% Carbon Fibers | |
| Color | Black | |
| Density (g/cm^3) | 1.41 | D 792 |
Mechanical
| Property | Value | Typical ASTM Test |
|---|---|---|
| Modulus of Elasticity (Tensile Test) (psi) | 920000 | D 638 |
| Tensile Strength at Yield (psi) | 17500 | D 638 |
| Elongation at Break (%) | 7 | D 638 |
| Flexural Strength (psi) | 28000 | D 790 |
| Modulus of Elasticity (Flexural Test) (psi) | 1040000 | D 790 |
| Compression Strength: 10% Strain (psi) | 24000 | D 695 |
| Compression Strength: 1% Strain (psi) | 2700 | D 695 |
| Compression Modulus (psi) | 489000 | D 695 |
| Impact Strength (Izod) (ft-lbs/in) | 1.16 | D 256 |
| Hardness (D) | 93 | D 785 |
| Hardness (M) | 107 | D 785 |
| Coefficient of Friction (Kinetic, 40 psi, 50 fpm) | 0.13 | D 3702 |
| Coefficient of Friction (Static) | 0.19 | D 3702 |
| Wear (K) Factor (in^3-min/ft-lbs-hr) (Against Steel, 40 psi, 50 fpm) | 6.00E-9 | D 3702 |
Thermal
| Property | Value | Typical ASTM Test |
|---|---|---|
| Melting Point (°F) | 633 | D 3418 |
| Deflection Temperature (°F) (264 psi) | 600 | D 648 |
| Service Temperature Continuous (°F) | 500 | |
| Service Temperature Intermittent (°F) | 572 | |
| Thermal Expansion (CLTE) (in/in/°F) | 8.00E-6 | D 696 |
| Thermal Conductivity (BTU-in/hr-ft^2-°F) | 6.37 |
Electrical
| Property | Value | Typical ASTM Test |
|---|---|---|
| Specific Surface Resistance (Ω/square) | 1.00E8 | D 257 |
| Dielectric Strength (V/mil) | 32 | D 149 |
| Dielectric Constant (1MHz) | 3.3 | D 150 |
Other
| Property | Value | Typical ASTM Test |
|---|---|---|
| Moisture Absorption (%) (24 Hours) | 0.06 | D 570 |
| Moisture Absorption (%) (Saturated) | 0.3 | D 570 |
| Flammability | V-0 |
The data stated are typical values intended for reference and comparison purposes only. The data should not be used as a basis for design specifications or quality control. The information is provided as a guide to the best of our knowledge and given without obligation or liability. Testing under individual application circumstances is recommended.